Need help?Do you have a question about the Roland SH-2 and is the answer not in the manual?
Adjusts the Bender lever's voltage reading.
Sets Key CV output voltage.
Covers coarse, fine, and linearity adjustments for VCO-1.
Fine-tunes VCO-1 pitch and width across ranges.
Tunes VCO-1 to pitch at different frequency ranges.
Adjusts VCO-2 for minimum beat repetition.
Tunes VCO-2 to pitch at different frequency ranges.
Adjusts VCF width for octave relation.
Tunes VCF to approximate 1kHz.
Adjusts the Bender lever's voltage reading.
Sets Key CV output voltage.
Covers coarse, fine, and linearity adjustments for VCO-1.
Fine-tunes VCO-1 pitch and width across ranges.
Tunes VCO-1 to pitch at different frequency ranges.
Adjusts VCO-2 for minimum beat repetition.
Tunes VCO-2 to pitch at different frequency ranges.
Adjusts VCF width for octave relation.
Tunes VCF to approximate 1kHz.
General| Brand | Roland |
|---|---|
| Model | SH-2 |
| Category | Synthesizer |
| Language | English |
To Next Page
