Need help?Do you have a question about the Roland SH-2000 and is the answer not in the manual?
General| Brand | Roland |
|---|---|
| Model | SH-2000 |
| Category | Synthesizer |
| Language | English |
Details changes to the VCO-2 module, including component substitutions.
Details changes to the OP-12 module, including component substitutions.
Explains changes in mounting screw configuration for increased structural strength.
Details FET component changes for improved reliability in AR-2, VG-7, MX-1.
Details IC component changes and related resistor modifications for PS-14C series.
Details the keyboard specification, transpose, and preset/envelope tablet functions.
Describes filter manual, touch effect, and portamento control features.
Covers output jacks, voltage changeover, power consumption, dimensions, and weight.
Illustrates the physical location of main assemblies and boards within the unit.
Provides step-by-step instructions for disassembling the unit's main components.
Presents a high-level functional overview of the synthesizer's signal flow.
Shows the interconnectedness of various components and boards via wiring.
Provides the component layout and technical notes for the OP-12C circuit board.
Details the circuit schematic and component layout for the VCO-2 module.
Presents circuit schematics for VCF-2A and VCF-2 modules, including replacement notes.
Provides the circuit schematic and component layout for the VG-7 module.
Shows the detailed circuit diagram for the MX-1 module.
Illustrates the component placement on the MX-1 PCB.
Displays the physical layout of the MX-1 printed circuit board.
Offers a comprehensive circuit diagram for the MX-1 module with more detail.
Shows a detailed view of component placement on the MX-1 PCB.
Illustrates the diode matrix configuration for the MX-1 module.
Presents component layouts and notes for PS-14C-D and PS-14C boards.
Important preliminary steps and safety advice before performing adjustments.
Detailed steps for tuning the synthesizer using an oscilloscope or beat method.
Procedures for adjusting key voltage levels on the VCO-2 and OP-12 boards.
Steps for balancing the Voltage Controlled Amplifier (VCA).
Steps for offsetting the Voltage Controlled Amplifier (VCA).
Procedures for adjusting the DC balance of the Voltage Controlled Filter (VCF).
Steps to adjust the cutoff frequency parameter of the Voltage Controlled Filter (VCF).
Steps to set the VCF scale width ratio for different keys.
Instructions for adjusting the resonance parameter of the VCF.
Procedures for adjusting the noise level and chorus effect parameters.
Steps for adjusting the touch sensitivity controls on the synthesizer.
Detailed steps for adjusting touch sensitivity gain and offset.
Displays expected waveforms for Wind, Growl Wow, and Funny Cat tablet settings.
Shows expected waveforms for Frog Man, Planet, and Space Reed tablet settings.
Displays expected waveforms for Popcorn, Song Whistle, and Singing Voice tablet settings.
Shows expected waveforms for Xylophone, Vibraphone, and Accordion tablet settings.
Displays expected waveforms for Harpsichord, Piano, and Fuzz Guitar 2 tablet settings.
Shows expected waveforms for Fuzz Guitar 1, Banjo, and Hawaiian Guitar tablet settings.
Displays expected waveforms for Bass Guitar, Violin, and Cello tablet settings.
Shows expected waveforms for Clarinet, Flute, and Oboe tablet settings.
Displays expected waveforms for Bassoon, Saxophone, and Trumpet tablet settings.
Shows expected waveforms for French Horn, Trombone, and Tuba tablet settings.
Illustrates and labels external components like cabinets, covers, and panels.
Identifies various switches, jacks, and control elements.
Illustrates internal components such as LEDs, PCBs, and holders.
Details components related to the power supply and chassis.
Shows parts specific to the keyboard assembly, including PCBs and holders.
Details the parts and mechanisms comprising the keyboard assembly.
Lists part numbers for housing, panels, and chassis components.
Lists part numbers for holders, bushings, and nuts.
Lists part numbers for switches, connectors, PCBs, and semiconductors.
Lists part numbers for capacitors, potentiometers, resistors, and fuses.
To Next Page
