Roland SP-404MKII - Page 151

Appendix
151
Function
Transmitted
Recognized
Remarks
*3: Output when MIDI Sync Out is “ON” and when there is no tempo input from an external device.
*4: Enabled when this unit is in remote mode (when a tempo signal is received from an external device).
*5: All samples stop playing back when the MIDI cable is unplugged.
*6: Enabled when playing samples in chromatic mode (MIDI CH 16).
*7:
MIDI channels
CH 1: BUS 1
CH 2: BUS 2
CH 3: BUS 3
CH 4: BUS 4
CH 5: INPUT
Control change message numbers and corresponding EFX controls
CC#19
EFX switch (0–63: OFF, 64–127: ON)
CC#83
EFX number (0–127)
“Control change messages and corresponding effects(P.140)”
CC#16
Ctrl 1 (0–127)
CC#17
Ctrl 2 (0–127)
CC#18
Ctrl 3 (0–127)
CC#80
Ctrl 4 (0–127)
CC#81
Ctrl 5 (0–127)
CC#82
Ctrl 6 (0–127)
*8:
Control change message numbers and corresponding controllers in DJ mode
MIDI channel 1 (CH1 sample)
MIDI channel 2 (CH2 sample)
MIDI channels 3 (pattern
sequencer)
CC#7
[Ctrl 1] knob: CH1 volume
slider (0–127)
[Ctrl 2] knob: CH2 volume
slider (0–127)
[Ctrl 1] knob: pattern sequencer
volume slider (0–127)
CC#8
[Ctrl 3] knob: X-FADE (CH1:
CH2 = 127:0–0:127)
-
-
CC#20
[ñ] button (0: pause, 127:
play)
[ñ] button (0: pause, 127:
play)
[ñ] button (0: pause, 127:
play)
CC#21
[õ] button (0: release the
button, 127: press the button)
[õ] button (0: release the
button, 127: press the button)
[õ] button (0: release the
button, 127: press the button)
CC#22
[SYNC] button (0: Off, 127: On)
[SYNC] button (0: Off, 127: On)
[SYNC] button (0: Off, 127: On)
CC#23
[CUE] button (0: Off, 127: On)
[CUE] button (0: Off, 127: On)
[CUE] button (0: Off, 127: On)
CC#24
[BEND+] button (0: release the
button, 127: press the button)
[BEND+] button (0: release the
button, 127: press the button)
[BEND+] button (0: release the
button, 127: press the button)
CC#25
[BEND-] button (0: release the
button, 127: press the button)
[BEND-] button (0: release the
button, 127: press the button)
[BEND-] button (0: release the
button, 127: press the button)
CC#26
[BPM+] button (0: release the
button, 127: press the button)
[BPM+] button (0: release the
button, 127: press the button)
[BPM+] button (0: release the
button, 127: press the button)
CC#27
[BPM-] button (0: release the
button, 127: press the button)
[BPM-] button (0: release the
button, 127: press the button)
[BPM-] button (0: release the
button, 127: press the button)
*9:
Program change numbers and corresponding patterns
PC#0
Pattern 1
PC#1
Pattern 2
:
:
PC#15
Pattern 16
Mode 1: OMNI ON, POLY
Mode 2: OMNI ON, MONO
Mode 3: OMNI OFF, POLY
Mode 4: OMNI OFF, MONO
○: Yes
×: No