To see
the name or the value of
the
parameter
which
you are now editing, do
as
follows.
©
Push the TONE of
the Edit Buttons.
The Display will respond with;
T rii I
I
imnco
/inifTi
A Ttr~ni
no*
fc
M/
V
m
fl\ fl»
ff*
Abbreviation Tone
Number to be edited
of the Vocie
Memory mode
and
Patch
Number
@
Edit with
the PG-800.
The parameter
name and its value are
shown in
the Display.
MANUAL
MODE
The JX-10 features
Manual mode
in which the
whole panel setting of
the
programmer
decides
the Tone. That is, now existing Tone
written in
memory has nothing
to do
with your sound
syn-
thesis. To turn the JX-10 to this mode,
simply
push the Manual Button
on
the PG-800.
*
if there is
no change by
moving the knob
or
switch on the programmer, it is becuase
the
position
you have set is exactly the
same as the
preprogrammed. If
it
happens, just ignore
it and
move
to the next procedure.
*
It may be quicker and easier to select a
Tone that
is similar
to the one you want to
synthesize, then
modify it.
32
To Next Page
Loading...
