c. Copying a Tone
A Tone in
the JX-10's
interna! memory can be
copied onto the Memory Cartridge and vice versa.
1)
Saving
a
Tone
to
the Cartridge
®
Set the Protect Switch on the Memory Car-
tridge
to the OFF position.
(2)
Set the Voice Memory Switch @to the INT
position.
@
Call the Patch Memory that contains the Tone
you wish to copy.
*
In the Dual or Split mode, the
Tone with a dot is
copied.
In the
Upper
whoie
mode, the Tone
of
the Upper section is copied.
®
Push the Write Button
®
.
The Display will respond with:
net
lOTTC
lynrrc
Push the TONE of the Edit
Buttons
®.
t
lOT
TO
fW(
t
J.
I
(_
'f~i
w
^
^
»^
V <i^ r'l
u
S /n
»\
^ S\ *
u
I
V
(
©
Set the Voice Memory Switch to the
position.
©
Using the
Ten
Keys,
assign the new location
{=
Tone number) where
you
wish the Tone you
called in the step
CD
to
be copied.
(D
Push
the Enter Key.
®
Return the Protect Switch on the
Memory Car-
tridge to the ON position.
A:
Interna! or Cartridge
B: Tone Number of the Patch
Memory
currently selected
51
To Next Page
Loading...
