2.
Functions
of the
Control
Knobs
The
following
controls can be operated
even while
you
are piaying the JX-10.
a. Control Assign Knob
&
Each of these two knobs can be used
for control-
ling the performance control function you
select
with the Control Assign Button. (See page
14
"3.
Control Assign".)
b. Bender
Lever
O
This Bender
Lever can be used during
live perfor-
mance for creating
guitar's
chocking-Hke effect.
The
left and right
extremes
of
movement create
the same
amount of pitch
bending effect. The
maximum effect
of the
bender can be
selected
with
the Bend Range Switch:
major 2nd, minor
3rd, major 3rd
or perfect 5th
higher or
lower.
Pushing this
lever forward
will create the
vibrato
effect. When the
tone
you are using
has already
taken in
a
vibrato
effect, the effect
will be deepened.
c. Aftertouch Rne Adjust Knob
O
The
Aftertouch effect is the
sound's alteration
obtained by pressing
the key
stronger after
playing
it
in a normal manner. The JX-10's
aftertouch
effect works
on the Vibrato,
Brilliance and Volume.
Vibrato: The
dpeth of the
vibrato effect is
deepened.
Brilliance; The tone will become brighter.
Volume: The volume of
the
sound will
increase.
O
©
n
'
=—^—
==;
=
=
L
3-
=
= 3r
The setting of On/Off or value
of
each
aftertouch
effect
can be written in each
Patch Memory inde-
pendently, but the Aftertouch Fine Adjust Knob
allows even more
delicate
adjustment of the
effect When this knob is set to the center position,
the same effect as set in the
Patch Memory can be
obtained,
and no effect
is obtained at the lowest
position [— ].
*
Different On/Off settings
and values of the after-
touch and
bender are written in each
of
the 64
Patch Memories. Therefore,
those effects you
acturatly gain
will greatly differ depending on
how these are set in the
Patch Memories. No
effect may be
obtained in some particular
settings.
12
To Next Page
Loading...
