Roland Super JX-10 - Page 50

2)
Loading a single
Patch
Memory to the JX-10's
internal memory
®
Set the Protect
Switch
on the JX-10 to the OFF
position.
(2)
Set the
Voice
IVIemory Switch ©to the CART
position.
(3)
Call
the Patch
Memory
to
be copied to the
JX-10.
®
Push
the
Write
Button
®-
The Display
will respond with:
QCMpTTc
unrrc.
Push the
PATCH of the Edit
Buttons
®.
CM/^
J.
J
(_
norru
TD
*it;»je
WW ni/
n
®
Set
the Voice Memory Switch to the
INT
position.
®
Using
the Patch Memory
Buttons
®,
assign
the Bank and
the
Number of the new location
on the
JX-10 where the Patch
Memory you
have called in
the step
(3)
is to be copied.
A: internal
or Cartridge
B:
Bank and
Number
of
the
Patch Memory
currently
selected
(D
Push the Enter
Key.
(D
Return
the
Protect
Switch on the
JX-10 to the
ON position.
NOTE
When a Patch Memory is copied from the
internal
memory
to
the Cartridge
and vice versa, the
Tones used for the
Patch Memory are also
copied.
Therefore
corresponding Tone
numbers
will
be
rewritten.
50