Roland Super JX-10 - Page 39

PROCEDURE
®
Push
the TONE
of the Edit Buttons.
The Display will
respond with;
_L
")
'I
1 (_!' ' '_'
'^
IfcLJKJ
I I
xt(_o
I Ml
KMu M ^ a?
Abbreviation
Tone Number to be edited
of the Voice
Memory mode
and Patch
Number
@
Using the relevant Ten Keys, assign the
number of
the parameter you wish to edit.
As shown right, push the key tn the correct
order,
then hit the Enter
Key.
(3)
As you actually
hear the sound, change the
value.
n
^
CT]
^
Assign Assign
Hit the
the left the right
Enter Key
number number
®
To continue to
edit other parameter, repeat the
step
@
to
©.
The a Dial
also can be used for
calling
a parame-
ter. Push
the TONE then the PARAM buttons, then
rotate
the a Dial, and the parameter shown in the
Display changes
sequencially. When the parame-
ter you want is shown, push
the
VALUE of the Edit
Buttons, then
edit the
value with
the a Dial.
When
you have completed editing the Tone,
push
the TONE
button. The indicator of the TONE will
go out and the Display returns
to the
usual indica-
tion
except that the Tone Numberflashes showing
that the Tone is edited but
not yet
written
into
memory.
If you call other Patch Memory at
this
stage,
the
edited Tone wili
be erased.
39