Roland Super JX-10 - Page 54

b. Function Display
Even while you are playing the
keyboard, you can
change wiiat is currently
shown
in
the Display to
other indication. Three different displays are
optional as follows.
•
Tone Name:
The names of
the Tones cur-
rently in use
are
displayed.
•
Split Point:
in the
Split mode, the Split
Points of the
Lower
and
Upper
sections
are
displayed.
•
MIDI
Channel: The MIDI
Channel number cur-
rently
in
use is displayed,
If
you
wish
to see any
of the left
three
displays,
simply press the Function
Display Button
®,
and
the Display changes
from the
usual indication
to
Tone Name, Spilt Point and
MID! Channel
as
shown below.
While the Tone number is being
displayed, select-
ing a different Tone
will display the
new
Tone
number.
When
you
call
a
different Patch Memory, the Func-
tion Display will accordingly change.
To return to the usual Display, push the
Enter
Key.
*
To return to the usual display,
push the Enter Key.
Tone
Name
W tV
'i/
A
A: Tone Number
of Lower Section
B; Tone Name of
Lower Section
C: Tone
Number of Upper Section
D: Tone Name of
Upper Section
Split Point
A
A: The
highest
note
of
the
Lower Section
B:
The lowest
note of the
Upper Section
C:
When the Split Point is set with MIDI Send,
it
will
be displayed
MID!
Channel
n/l T TiT
1 iJ.
Hi.
Zii iii.r
* ft
'1^1^
P*
*
A
MIDI
Channel number
of
the Receiver
(LOWER/UPPER)
MIDI
Channel number
of
the Transmitter
(LOWER/UPPER)
Patch Memory Channel (These are displayed
when they have been set with MID! Send.
For the
detailed explanation,
see
"MIDI" on page 56.
54