Roland T-8 User Manual

Using the Rhythm Sequencer
11
Setting the probability
This shows how to set the probability for notes to play back. You can use the probability feature to make a pattern play in different
variations, while that same pattern keeps playing back.
1. Press one of the step 1–16 buttons (and keep holding the step buttons until the operation is finished).
The probability value (P.0–P.100) is displayed.
2. Turn the [TEMPO/VALUE] knob to set the value.
Inputting sub steps
You can divide the steps you input to create rolls or repeated strokes using the sub step function.
1. Hold down an instrument button and press one of the step 1–16 buttons.
The status of the current sub step is shown.
2. Hold down the instrument button and press one of the step 1–16 buttons again.
This changes the sub step setting. The settings cycle through in this order: OFF Ó 1_2 Ó 1_3 Ó 1_4 Ó FLAN.

Roland T-8 Specifications

General

Built-in display	No
Headphone out	Yes
Battery life	4.5 h
Power source type	Battery, USB

Weight and Dimensions

Depth	106 mm
Width	188 mm
Height	36.2 mm
Weight	310 g