Roland T-8 - Reverb Configuration and Send Settings

Using Delay and Reverb
20
Setting how much signal is sent to the delay
1. Hold down the [SHIFT] button and press the [C (DELAY)] button.
“d.Snd” is displayed.
2. Press the button of the instrument you want to set.
The current value (0–127) is shown on the display.
* Press the [ACCENT] button to set the send amount for the signal received via USB.
3. Turn the [TEMPO/VALUE] knob to set the send amount.
4. When you are finished, press the [C (EXIT)] button.
Configuring the reverb
Adjusting the reverb volume
1. Turn the [REVERB] knob.