Settings for the Entire TD (SYSTEM)
40
Viewing Information About the
USB Flash Drive (Information)
Here’s how to view information about the USB ash drive.
Parameter Description
Backups Number of data backups
Kits Number of saved drum kits
Size Used
Amount of memory used on the USB
ash drive
1. Choose “Information“ and press the [F3] (ENTER)
button (p. 38).
2. When you’ve viewed the information, press the
[F3] (OK) button to close the screen.
Formatting a USB Flash Drive
(Format)
NOTE
When you execute the Format operation, all data on
the USB ash drive will be erased.
1. Choose “Format“ and press the [F3] (ENTER)
button (p. 38).
2. Press the [F3] (FORMAT) button.
A conrmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
3. If you’re sure that you want to format the USB
ash drive, press the [F3] (OK) button.
Once again, a conrmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
4. If you’re sure that you want to format the USB
ash drive, press the [F3] (OK) button.
When formatting has been completed, the screen will
indicate “Completed.”
To Next Page
Loading...
Need help?
General
