Roland TD-3KW User Manual

TD-3KW
Thank you, and congratulations on your choice of the Roland Drum System TD-3KW.
* For the Snare (PDX-8) to function correctly, trigger parameters
in the sound module TD-3 must be adjusted.
202
Copyright © 2006 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the
written permission of ROLAND CORPORATION.
201a
Before using this unit, carefully read the sections entitled: “USING THE UNIT
SAFELY” and “IMPORTANT NOTES” (p. 2, p. 3). These sections provide important
information concerning the proper operation of the unit. Additionally, in order to feel
assured that you have gained a good grasp of every feature provided by your new
unit, Owner’s manual should be read in its entirety. The manual should be saved
and kept on hand as a convenient reference.
Owner’s Manual
TD-3KW_e 1 ページ ２００６年１月２４日 火曜日 午後６時７分

Roland TD-3KW Specifications

General

Brand	Roland
Model	TD-3KW
Category	Drums
Language	English

Summary

Using the Unit Safely

About WARNING and CAUTION Notices

Explains the meaning of WARNING and CAUTION notices used in the manual.

About the Symbols

Describes the meaning of common symbols used for warnings and instructions.

Always Observe the Following

Lists essential safety precautions for operating the unit.

Important Notes

Placement

Provides guidance on where to place the unit to avoid temperature extremes or damage.

Maintenance

Details proper cleaning methods and substances to avoid for unit maintenance.

Additional Precautions

Offers advice on handling controls, cables, and managing volume levels.

Checking the Contents of the Box

MDS-3C (Drum Stand)

Instructions for assembling the drum stand, including stability precautions.

TD-3 (Percussion Sound Module)

Guidance on attaching the sound module to the drum stand.

PDX-8 (Snare) Usage

Adjusting the Head Tension

Explains how to properly tighten the snare head for optimal response.

Head Tension Notes

Clarifies that head tension affects response, not pitch, and may need readjustment.

PDX-8 Playing Methods

Head Shots

Describes how to strike the center of the pad for head shots.

Rim Shots

Explains how to strike the rim of the pad for rim shots.

Cross Stick

Details how to strike only the rim for cross stick sounds.

PDX-8 Head Replacement

When to Replace the Head

Identifies signs that indicate the head needs replacement.

Replacing the Drum Head

Step-by-step instructions for replacing the drum head.

PDX-8 Specifications

Lists technical specifications for the PDX-8 snare pad.

PD-8 (Tom) Usage

Playing the PD-8

Describes the 'Head Shot' playing method for the PD-8 pad.

Attaching the PD-8 to a Stand

Instructions for securely mounting the PD-8 pad onto a stand.

PD-8 Specifications

Lists technical specifications for the PD-8 tom pad.

CY-5 (Hi-Hat) Setup

Making the Settings

Details how to mount and set up the CY-5 hi-hat pad.

Mounting the Hi-Hat Clutch

Step-by-step guide for assembling the hi-hat clutch mechanism.

CY-5 Specifications

Lists technical specifications for the CY-5 hi-hat cymbal pad.

CY-8 (Cymbal Pad) Usage

Playing the CY-8

Explains 'Bow Shot', 'Edge Shot', and 'Choking' techniques for the cymbal pad.

Attaching the CY-8 to a Stand

Instructions for securely mounting the CY-8 cymbal pad to a stand.

CY-8 Specifications

Lists technical specifications for the CY-8 cymbal pad.

FD-8 (Hi-Hat Pedal) Operation

Adjusting Pedal Travel

Describes how to adjust the pedal's arm travel for desired response.

Using the FD-8 Pedal

Explains how to control hi-hat sounds using the pedal.

Anchor Bolts for Carpet

Guidance on using anchor bolts for stability on carpet.

FD-8 Specifications

Lists technical specifications for the FD-8 hi-hat control pedal.

KD-8 (Kick) Setup

Making the Settings

Steps for setting up the KD-8 kick trigger pad.

Attaching the Kick Pedal

Instructions for securing the kick pedal to the KD-8.

Adjusting Foot Plate Height

How to adjust the kick pedal's foot plate for stability.

KD-8 Adjustments

Adjusting Anchor Bolts

Details how to adjust anchor bolts for carpet vs. floor use.

Using a Twin Pedal

Advice for using a twin pedal with the KD-8 kick pad.

KD-8 Specifications

Lists technical specifications for the KD-8 kick trigger pad.

Assembling the TD-3KW

Connecting the Cables

Instructions for connecting pads to the TD-3 sound module using provided cables.

Trigger Inputs Overview

Diagram showing trigger input assignments on the TD-3 module.

Trigger Settings for TD-3

Adding Optional Pads

Guidance on adding optional pads and their corresponding trigger inputs.

Available Options

Lists compatible trigger pads, mounts, and accessories for the TD-3KW.

Information

Service and Distributor Information

Lists Roland service centers and distributors by region for repair service.