$
5. Press the [TAP] button when you
want to insert a fill-in.
If the first beat is playing, the fill-in is
inserted starting at the second beat; if
the second or subsequent beat is
playing, the fill-in is inserted starting at
the next measure.
Using auto fill-in
1. Press a BASIC RHYTHM [1]–[12]
button to select a basic rhythm.
2. Set the [BASIC-VARIATION] switch
to the desired position.
3. Use the measure selector to specify
the interval at which a fill-in is inserted.$
2 (every two measures), 4 (every four
measures), 8 (every eight measures),
12 (every 12 measures), 16 (every 16
measures)
4. Press an INTRO/FILL IN [1]–[4]
button to select a fill-in rhythm.
5. Press the [START/STOP] button.
A fill-in is automatically inserted at the
specified interval of measures.
To cancel auto fill-in, set the measure
selector to MANUAL.$
* You can rhythm-pattern-write an
intro/fill-in during playback by holding
down the [TAP] button and pressing
the [1]–[16] buttons.$
* Even while auto fill-in is specified,
you can use the [TAP] button to insert
a fill-in.
To Next Page
Loading...
