EasyManuals Logo

Roland TrueVIS SG-540 User Manual

Roland TrueVIS SG-540
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Thank you very much for purchasing this product.
To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through
this manual completely and store it in a safe location.
Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.
The contents of this manual and the specications of this product are subject to change without notice.
This manual and the product have been prepared and tested as much as possible. If you nd any misprints or errors,
please inform Roland DG Corp.
Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may occur through use of this
product, regardless of any failure to perform on the part of this product.
Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may occur with respect to any
article made using this product.
USER'S MANUAL
R1-160418T
This machine has a built-in inductive reading/writing communication device that uses radio waves (an RFID device).
RFID is used to read the information inscribed on the ink pouches (or cartridges).
If you use a pacemaker or other implanted medical equipment, do not approach this machine.
Do not use this machine within hospitals.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roland TrueVIS SG-540 and is the answer not in the manual?

Roland TrueVIS SG-540 Specifications

General IconGeneral
Max Print Width54 inches
Print TechnologyPiezo inkjet
Media ThicknessMax. 1.0 mm (39 mil) with liner
ConnectivityEthernet (10BASE-T/100BASE-TX), USB 2.0
Power RequirementsAC 100 to 240 V, 50/60 Hz
Operating EnvironmentHumidity: 35 to 80%RH (no condensation)

Related product manuals