8
Macintosh Audio Applications CD-ROM
fig.2-6d.e_30
4.
In the popup menu of the
Sound
dialog box, select
Source
, and set “Device” to “USB audio.”
fig.2-6e.e_30
5.
From the popup menu, select
Sample
and choose the recording quality.
For CD-quality audio, select “44.1 kHz,” “16 bit,” “stereo.”
fig.2-6f.e_30
6.
Click
[OK]
to close the
Sound
dialog.
7.
Click
[OK]
to close the
Record Settings
dialog.
Adjusting the input level
Play the external audio device, and adjust the input level. If the input level is excessive and
causes clipping, lower the volume of the audio device so that the maximum level does not
exceed 0 dB.
fig.2-6g_30
Recording
When preparations are completed, use the following procedure to record.
1.
In the
Record
dialog box, click .
2.
Play your audio device.
To Next Page
Loading...
