Need help?Do you have a question about the Roland FC-100mkII and is the answer not in the manual?
General| Brand | Roland |
|---|---|
| Model | FC-100mkII |
| Category | Accessories |
| Language | English |
Advice on where to avoid using or storing the unit to prevent damage.
Instructions for cleaning and maintaining the unit to prevent damage or discoloration.
Information about potential memory loss and the importance of backing up data.
General warnings and advice for handling and protecting the unit.
Details of the rear panel connectors and controls on the FC-100mk II.
Details of the front panel controls, pedals, and indicators on the FC-100mk II.
Mode for connecting the FC-100mk II with devices featuring an RRC IN connector.
Mode for controlling MIDI devices via the Roland RMC-1 converter.
Illustrates connection examples for using the RRC Foot Pedal Mode.
Instructions for setting the FC-100mk II to the RRC Foot Pedal mode.
Explains how to select patches and use pedals in RRC mode.
Details on Control Pedal functions and modes (Latch/Unlatch).
Information on connecting and using expression pedals with the unit.
Illustrates connection examples for using the MIDI Foot Pedal Mode.
Configuration of MIDI Mix, Channel, OMNI, and Control Numbers.
Procedure for setting the MIDI channel using pedals.
Procedure for setting OMNI On/Off status using the Bank pedal.
Procedure for assigning Control Numbers to pedals.
Detailed instructions and examples for setting Control Numbers.
Procedure for selecting patches by Group, Bank, and Number.
Steps to select a bank using the Bank Pedal and Number Pedals.
Steps to select a number using the Number Pedals.
Details on Control Pedal's Latch (Mode I) and Unlatch (Mode II) modes.
Information on connecting and using expression pedals.
Explains the five modes and their functions with exclusive messages.
Details on RRC (Roland Remote Control) mode operation.
Chart showing editable data by panel operation or exclusive messages.
Details of the default settings for various modes.
Solutions for problems related to the unit not turning on.
Troubleshooting steps for no sound from connected units.
Solutions for problems with changing patches on the connected device.
Troubleshooting steps for the Control Pedal not working properly.
Troubleshooting steps for expression pedals not functioning correctly.
Solutions for the Tuner Out function not working.
Defines the data structure for Roland's exclusive messages (Type IV).
Explains MIDI status codes and Roland's Manufacturer ID.
Technique for transferring messages using address mapping.
Description of the DT1 message for actual data transfer.
Procedure for interactive data transfer with error checking.
Message format for requesting data from a device.
Message indicating successful reception or completion.
Message to inform a remote device of the end of a message.
Message warning of communication faults during transmission.
Message to terminate communication due to errors or operator action.
Illustrates typical message flows for data transfer.
Chart detailing transmitted and recognized MIDI functions.
Information on system exclusive message handling.
Details on system common MIDI messages.
Information on system real-time MIDI messages.
Details on auxiliary MIDI messages like Active Sense and Reset.
Details on data transmitted by the FC-100MKII.
Data recognized and processed by the FC-100MKII.
Structure and format for exclusive MIDI communications.
Explains Request (One way) and Data Set (One way) formats.
Addresses related to error messages transmitted by the FC-100MKII.
Addresses used for requesting data from the FC-100MKII.
Addresses that define the status of various pedals.
Mapping for bank display segments and their validity in modes.
Mapping for pedal indicators and their validity in modes.
Mapping for output mode resistors (latch/unlatch).
Overview of valid exclusive messages and their parameters.
Examples of recognizable exclusive messages and their data.
Lists the types of switches on the FC-100mk II.
Lists the types of indicators on the FC-100mk II.
Details the display component of the FC-100mk II.
Lists the connection jacks available on the FC-100mk II.
Specifies power source and consumption details.
Physical dimensions and weight of the unit.
Lists included accessories and optional items.
Warning about potential interference and compliance with FCC rules.
Notice regarding Class B digital apparatus and Canadian regulations.
To Next Page
