Roland FC-100mkII - Transmitted Data; Recognized Receive Data; Exclusive Communication; Communication Format

Foot Controller + RRC TO MIDI Converter
Date
Jan. 25 1989
Model FC - 1 OOMK 1I + RMC - 1
MIDI Implementation
Version
1.00
FC-l00MKIl is able to connect ether MIDI units through RRC TO MIDI CONVERTER
(RMC-l).
In Following sentences the number with H at the end is nexedec"lmlll. the numbar
with B at the end is binery. Bnd the number with nothing at tMe end is decimal.
NeKt nameS is changed to following om;~lI.ive names; Control pedal to C_pedel.
Groue pedal to G_pedal, Ssnk pedal to B~edel.
11. TRANSMITTED DATAl
n .. MIDI Basic Channel
cc .. Control Number
vv '" Control Value
OH - FH (1 - 16)
OOH - 5FH (0 95)
OOH - 7FH (0 - 127)
Th'IS message is vansmitted when C_peda! or expression pedals ere treated.
n = MIDI Basic Chan'1el
OP Program Number
OH - FH (1 - 16)
DOH - 5FH (0 - 95)
ThiS meSSage is transmitted when the patch of FC - 100MKII is changed.
StatuS
FOH System Exclusive
F7H EOX (End Of System Exclusive)
T"is message IS transmitted wher"l remote controlled pedals are treated.
Refer to "Roiand exclusive Messages" lind after Sections ~.
\3. EXCLUSIVE COMMUNICATION I
All exclusive communications are based on the following structure.
( Roland Exclusive Format Type IV • One Wav Transmit)
Refer to ~Roland exclusive Messages
W
~
FOH
41H
OnH
29H
"H
[ bbH
[
ccH
[
[ ddH
F7H
Description
Exclusive statu
Roland -10 #
Device -10 # "'" MIDI basic channel
where n + I .. cnannei #
Model -ID # (FC - 100MKU)
Command - ID #
Address J [ J depend on Command - tD
Data ]
)
Checksum]
EOX (End of SYStem ElI.cl'.Jsive)
Summad value of the all bytes between Commend - ID and EOX must be OOH
(7bits).
It does not include Commend - ID and EOX. Refer to Sections 6.
14. COMMUNICATION FORMAT I
4.1 Request (One way)
(Recognized oniy)
8vte
~OH
41H
Onh
23H
"H
bbH
ccH
ddH
F7H
Description
Exclusive status
Roland -10 #
Device -10 # "" MIDI casic cnannel
where n + 1 ... c'1annel #
Model-IO # (Fe - 100MKII)
Command-IO # {ROI)
Adoress
Oata sile
Checksum
End of System ElI.clusive
4.2 Data set (One way)
RQ1 11H
on 12H
~ (Transmitted and RecOblnized)
FEH Active Sensin ..
This message is transmitted every ~OOmsec during no message,
12. RECOGNIZED RECEIVE DATAl
P:J .. Program l\iumber
n = MIDI Sasie Channel
DOH - 5FH (0 - 95)
OH - FH (1 - 16)
Fe - 100MKii changes the indication of its own patch When it recognizes this
message.
System Exclusiva
Status
FOH System Exclusive
F7H EOX (End Of System Exclusive)
Refer to "Roland I'Ixclusive Messages· and after Sections 3.
~
FOH
41H
OoH
29H
"H
bbH
ccH
ddH
F7H
Description
Exclusive status
Roland -10 #
Device - ID # = MIDI ::.asic channel
where n + 1 .. channel #
Mooel -10 # (Fe - 100MK:.I)
Command - 10 #
AddreSS
Data
Da!"
Checksum
End of SYStem Exclusive