[5]
Using
Exclusive
Messages
[Important)
1.
Concerning
Modes
Exclusive messages are automatically transmitted and received between
the
FC~100MK
II
and a compatible Roland product.
To
control
the
FC-
1
OOMK
II using 'external Exclusive messages,
you
must
use an external
device that
can
transmit and recieve Exclusive messages specific
to
the
FC·'
DDMK
lI.
The Fe·100MK
IT
features five modes. Using external Exclusive messages,
you
can
change modes, MIDI
Mix
status, and Control numbers (Control
Pedal and Expression Pedal).
(MODE
0)
RRC
Foot
Pedal
Mode
(page
6)
When
a Patch
is
selected, the corresponding Control Change is transmitted.
When
using the Control Pedal
or
Expression pedal, Control Change
is
transmitted,
(MODE
n
MIDI
Foot
Pedal
Mode
(page
9)
The same message
as
Mode
0 are transmitted. MIDI channels and Control
numbers
can
be
changed.
(MODE
2)
RRC
Remote
Control
Mode
Only the Control
Pedal.
works
as
a remote control pedal.
When
a Patch
is
selected, the corresponding Control Change is transmitted. When using the
Control Pedal or Expression pedal. Control Change is transmitted. (The
same backup data
as
Mode
0 is set.)
(MODE
3)
MIDI
Remote
Control
Mode
Only the Control Pedal 0
works
as
a remote control pedal. The same mes-
sages
(Program Change and Control Change messages)
as
Mode
1 are
transmitted.
(The same backup data
as
Mode
1 is set.)
(MODE
4)
RRC
All
Remote
Control
Mode
All the pedals (except
for
the
Expression pedals)
work
as remote control
pedals and can
be
controlled
by
the Exclusive messages.
(The
same backup
data
as
Mode
0 is set.)
..
Modes
0 or 1 can be set at
power
up using pedals. Any
of
the five modes
can
be
changed to by sending Exclusive messages from
an
external device.
About
Remote
Control Pedals
----------------
Remote
Control Pedal functions
are
assigned to
Modes
2,
3 and 4,
which
can
only
be
selected by Exclusive messages. Remote Control
pedals
are
those
which
can be controlled individually by means
of
external Exclusive messages.
(In
Mode
4, the Bank Display can also be
controlled.) Also. a Remote
Control Pedal transmits pedal messages
when
receiving Exclusive messages, therefore, the
FC-1
OOMK
II can be
used
for
versatile purposes
with
Exclusive messages .
..
Data changed by Exclusive messages is
not
retained in memory.
When
the
unit
is switched
off
or
the
mode
is changed,
it
is erased.
'*
Data
which
can be changed
in
each mode is
shown
on
page
19
"I]]
Ref-
erence
:
1.
Table
of
data
which
can be edited" .
..
For details about Exclusive messages, see page
26
"MIDI
Implementation
Chart" .
77
To Next Page
Loading...
