Roland FC-100mkII - How to Use the FC-100 mk II; RRC Foot Pedal Mode; MIDI Foot Pedal Mode

[2] How to use the FC-100MK II
1. RRC Foot Pedal Mode
2. MIDI Foot Pedal Mode
The FC-l00MK IT features two Foot Pedal Modes; the RRC Foot Pedal and
MIDI Foot Pedal modes. Select the one that suits your purpose.
Select this mode for connecting the FC-100MK II with devices featuring an
RRe IN connector. The FC-100MK II can be connected to any device which is
compatible
with the FC-l00.
To use the RRC Foot Pedal Mode ...•.
Refer to "00 RRC Foot Pedal Mode" on page 6.
Select this mode for controlling MIDI devices, in combination with the RRC
TO
MIDI Converter (Roland RMC-l: optionali.
This mode allows you to make changes in settings related to the following:
MIDI Mix On/Off
MIDI Channel
OMNIOn/Off
Control Number
Control Pedal
Expression Pedal
To use the MIDI Foot Pedal Mode .....
Refer to "IAJ MIDI Foot Pedal Mode" on page 9.
* Whenever you connect an RMC-1 to the FC-100MK II, be sure to set
the Fe-l00MK IT to the MIDI Foot Pedal mode.