Using the PDX-100
6
Connecting to the Percussion
Sound Module
Use the included stereo cables to connect pads to your
percussion sound module (sold separately).
Connect the L-shaped end of the cable to the pad’s
OUTPUT jack.
Using a monaural cable will NOT allow rim shots or
positional sensing.
MEMO
Refer to the table below for details on trigger inputs
of sound modules supporting rim shots.
NOTE
Prevent malfunction and/or damage to speakers or
other devices by always turning down the volume,
and/ or power of all devices before making any
connections.
Example: Percussion Sound Module TD-30
I-shaped
plug
To Output jack
L-shaped
plug
Trigger Parameter Settings on the
Sound Module
Compatibility with various sound modules
Model
Head
Shot
Rim
Shot
Cross
Stick
Positional
Sensing
Rim Shot
Nuance
Brush
Sweep
TD-30
TD-20X/
TDW-20/
TD-20/
TD-12
√ √ √ √ √ √
TD-15/
TD-11/
TD-9/
TD-4
√ √ √ — — —
MEMO
For details, refer to the owner’s manual of your
percussion sound module.
Recommended parameter settings
Below please nd recommended trigger parameter
settings when using the PDX-100 with various sound
modules.
Further trigger parameter adjustment may be needed
depending on the way in which the PDX-100 is mounted
or the playing environment.
For details on editing refer to the owner’s manual of your
sound module.
Model Parameter Value
TD-30 Trig Type PDX100
TD-15/
TD-11
Pad Type PDX100
TD-20X/
TDW-20/
TD-12
Trig Type PD105X
Sensitivity 6
Rim Gain 1.8
Rim Shot Adjust 2.5
TD-20
Trig Type PD105
Sensitivity 6
Rim Gain 1.8
Rim Shot Adjust 2.5
TD-9/
TD-4
Trig Type PD105
Sensitivity 7
Rim Gain 1.8
Rim Shot Adjust
(Rim Adjust)
2.5
TD-30/
TD-20X/
TD-20/
TDW-20
TD-12
TD-15/
TD-11/
TD-9
TD-4
Inputs that
allow rim
shots
2 SNARE,
3–6 TOM 1–4,
12–15 AUX
1–4
2 SNARE,
3–5 TOM 1–3,
11–12 AUX
1–2
SNARE,
TOM 1–3,
AUX
SNARE
Inputs
that allow
cross-stick
2 SNARE 2 SNARE SNARE SNARE
Inputs
that allow
positional
sensing
2 SNARE
2 SNARE — —
(TD-30 only)
3–6 TOM 1–4,
12–15 AUX
1–4
To Next Page
Loading...
