4
The built-in EXP pedal can also be assigned to parameters other than volume.
ffig.q40
1. Make sure you’re in Play mode.
If you’re not in Play mode, press [EXIT] several times.
2. Press [EFFECT].
ffig.q30
fig.q05
3. Press [F2] (ON/OFF) to turn WAH “ON.”
fig.q39
4. Press [F5] (EDIT) to access the WAH EDIT screen.
5. Press [F1] (TYPE).
6. Turn [VALUE] to select “PEDAL WAH.”
7. Press [F6] (SET PDL) to assign WAH to the built-in EXP
pedal.
* If you wish to save the sound, perform the Write operation
(Owner’s Manual; p. 25).
Using the expression pedal (using the wah pedal)
To Next Page
Loading...
