Roland VG-88 - Page 7

7
Make multi-effect settings
1. Press [EFFECT].
ffig.q30
fig.q31
2. Press [F1]–[F3] to select each effect.
3. Turn [VALUE] to select the effect setting.
4. Press [PAGE ] to access the effect ON/OFF screen
located in the next page.
* You can also move to the next page by repeatedly pressing
[EFFECT].
fig.q33
fig.q34
5. Repeat steps 2–4 to turn each effect ON/OFF, and try
playing the effect.
Using polyphonic effects
(Example)
Here we will make settings for the polyphonic slow gear
effect.
1. Press [COSM GUITAR].
ffig.q18
2. Press [F1] (ON/OFF) to select “ON.”
3. Press [F4] (TYPE), and use [VALUE] to select “POLY
SG.”
ig.q36
4. Press [PAGE ] to access page 2.
* You can also move to the next page by repeatedly pressing
[COSM GUITAR].
fig.q38
5. Press [F2] (ON/OFF) to turn SLOW GEAR “ON.”
6. Press [F5] (EDIT) to access the SLOW GEAR parameter
setting screen.
7. Press [F1]–[F2] to select parameters, and rotate [VALUE]
to set their values.
8. Press [EXIT] several times to return to the Play screen.
* If you wish to save the sound, perform the Write operation
(Owner’s Manual; p. 25).