3
Preset Patches
The 200 preset patches contain settings made at the factory that demonstrate
many of the fantastic things that the VG-99 can do. Preset patches can’t be
overwritten, but the settings can be altered and then stored in a user patch.
This allows you to use preset patches as starting points to create your own
sounds.
The preset patches are in patch locations 201-400. To identify them, they
have the label PRESET next to the patch number.
User Patches
Just like the preset patches, the 200 user patches contain factory settings
that demonstrate things that the VG-99 can do. However, unlike the
preset patches, user patches can be overwritten to store your own custom
settings.
The user patches are in patch locations 001-200. They have the label USER
next to the patch number.
Changing the Way Patches are Displayed in the Play
Screen
There are four different Play screen variations. In addition to the patch name
and number, each provides unique information about what’s currently
happening inside the VG-99.
This Play screen variation shows icons that represent the COSM instruments
and amps that are used in the patch.
This screen shows the tempo, patch level, GK Setting, and COSM instruments.
This variation shows the effects chain used in the patch.
This variation displays the current input and output signal levels.
While the Play screen is displayed, use the PAGE buttons
to select the desired variation. Choose whichever screen
works best for you.
The currently selected Play screen variation is remembered when you
power off the VG-99.
Patch Selection
There are many different ways to select VG-99 patches, both from the front
panel and remotely via external switches.
Patch selections can only be made when the Play screen is displayed.
Selecting Patches from the Front Panel
Using the PATCH/VALUE Dial
The primary way to select patches from the VG-99’s
front panel is to scroll through them sequentially with
the PATCH/VALUE dial. Simply turn the dial to select the
desired patch.
To Next Page
Loading...
