Roland VR-09 - Recording Performance: Song Management; Playing a Song; Renaming a Song; Deleting a Song

Recording Your Performance
24
Playing a Song
Here’s how to play back a song that you’ve saved on a USB ash
drive.
1. Connect a USB ash drive (sold separately) to the USB
MEMORY port (p. 4).
2. Press the [SONG/RHYTHM] button several times to access
the SONG screen.
3. Turn the [VALUE] dial to select the song.
MEMO
If you wish to select a song stored in a folder on a USB ash
drive, you can navigate as follows.
• To move to a dierent folder: Use the [VALUE] dial to select the
“
,” and then press the [ENTER] button or the [ ]
(START/STOP) button.
• To select a song within the folder: Use the [VALUE] dial.
• To move out of a folder: Use the [VALUE] dial to select the
“
,” and then press the [ENTER] button or the [ ]
(START/STOP) button.
4. Press the [ ] (START/STOP) button.
The song will start playing.
The measure number is displayed for SMF-format songs, and the
playback time is displayed for audio-format songs.
5. Press the [ ] (START/STOP) button.
The song will stop playing.
MEMO
• You can change the playback tempo of SMF format songs (p.
22).
• You can use the DRUM LEVEL [
] [ ] buttons to adjust the
playback volume (p. 22).
• If the song was recorded on this unit as SMF data, you can use
the LEVEL [
] [ ] buttons of each section or the [LEVEL] bar to
adjust the volume.
Button operations
[ ] button
Returns to the beginning of the song. If you press
this at the beginning of a song, you’ll move to the
beginning of the preceding song.
Hold down the button to rewind the song.
[
] button
Moves to the next song. Hold down the button to
fast-forward the song.
[
] (START/STOP)
button
Play/stop the song.
Renaming a Song
Here’s how to rename a song.
1. Connect a USB ash drive (sold separately) to the USB
MEMORY port (p. 4).
2. Press the [SONG/RHYTHM] button several times to access
the SONG screen.
3. Turn the [VALUE] dial to select the song.
4. Press the OCTAVE [UP] button.
The RENAME screen appears.
If you decide to cancel, press the [EXIT] button.
5. Assign a name to the song.
Button/Dial Operation
CURSOR [
] [ ] buttons
Select the character that you want
to change.
[VALUE] dial Changes the character.
MODE [ORGAN] (Del) button Delete the character.
MODE [PIANO] (Space) button Inserts a space.
6. Press the [ENTER] button or the MODE [SYNTH] (Save)
button.
The song will be renamed.
Deleting a Song
Here’s how to delete a song that you’ve saved on a USB ash drive.
1. Connect a USB ash drive (sold separately) to the USB
MEMORY port (p. 4).
2. Press the [SONG/RHYTHM] button several times to access
the SONG screen.
3. Turn the [VALUE] dial to select the song.
4. Press the OCTAVE [DOWN] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
5. Press the [ENTER] button.
The song will be deleted.
NOTE
Do NOT turn o the power or disconnect the USB ash drive
while “Executing...” is displayed.