Roland VR-09 - Selecting Sounds; Selecting Sounds with One Touch; Selecting Organ Sounds; Selecting Piano Sounds

9
Selecting Sounds
Selecting Sounds with One Touch
By using the Mode buttons you can play organ, piano, and
synthesizer sounds individually.
REFERENCE
For details about the sounds, refer to “Sound List” in the “Data
List” (PDF).
You can download the “Data List” (PDF) from the Roland website.
http://www.roland.com/manuals/
Selecting Organ Sounds
1. Press the MODE [ORGAN] button.
The MODE [ORGAN] button will light.
Harmonic bars (p. 12)
Sound
Sound variation
Volume ([LEVEL] bar)
Multi-eect type (
&
PDF)
Octave (p. 17)
MEMO
Use the CURSOR [
] [ ] buttons to move the cursor to an item,
and turn the [VALUE] dial to change the sound variation/multi-
eect type.
Selecting the organ sound variation
1. In the organ section, press the [TYPE] button.
2. Turn the [VALUE] dial to select the desired type of sound.
MEMO
• You can play the keyboard to audition the sound at which the
cursor is located.
• If you press the [TRANSPOSE] button while the ORGAN TYPE
screen is shown, it will be held. Press the [EXIT] button to return
to the previous screen.
• The organ sounds of this unit reproduce the distinctive way in
which notes played on a vintage organ are triggered even by a
shallow key-press. This is called the “quick ring function.”
• The organ sounds of this unit are produced by a “virtual
tonewheel sound engine” that uses digital technology to
faithfully simulate the way in which a tonewheel organ
generates sound.
Selecting Piano Sounds
1. Press the MODE [PIANO] button.
The MODE [PIANO] button will light.
Volume
(PIANO LEVEL [ ] [ ] button)
Octave (p. 17)
Sound
Sound variation
Multi-eect type (
&
PDF)
MEMO
Use the CURSOR [
] [ ] buttons to move the cursor to an item,
and turn the [VALUE] dial to change the sound variation/multi-
eect type.
Selecting the piano sound variation
1. Press one of the sound buttons in the piano section.
2. Turn the [VALUE] dial to select the desired sound
variation.
MEMO
• You can play the keyboard to audition the sound at which the
cursor is located.
• If you press the [TRANSPOSE] button while the sound variation
select screen is shown, the select screen will be held. Press the
[EXIT] button to return to the previous screen.