Roland VS-2480 - Page 9

9
VS-2480/2480CD Q&A
13.Hold down [STATUS] for Input Mixer Channel 1. The
display switches to the Quick Routing screen.
14.Press [F4 (AllClr)]. All track assignments are cleared.
15.Press [IN 1–16 (SOLO)].
16.Press [SELECT] for Input Mixer Channel 1. Input 1 is
assigned to Track 1.
17.Press [STATUS] for Channel 2.
18.Press [SELECT] for Channel 2. Input 2 is assigned to
Track 2.
19.In the same way, assign Inputs 3, 4, 5, 6, 7, and 8 to
Tracks 3, 4, 5, 6, 7, and 8, respectively.
20.Press [HOME (DISPLAY)]. The VS-2480/2480CD
switches to Home condition.
21.Press [REC]. The VS-2480/2480CD enters recording
standby mode.
22.Press [PLAY]. Recording begins.
23.Press [STOP]. Recording stops.
40452812 3*REC