6.
Press Exercise* so the button is lit. Go to page 66/67 in “Vocal Workouts for the Contemporary Singer” for Exercise 4.
7.
Use the up/down arrows to select “007” and press (Play/Stop); the Exercise with the low range vocal guide track will play.
8.
Use the up arrow to select “008”; the Exercise without the low range vocal guide track will play.
9.
For the high range version of this Exercise, use the up arrow to select “035” and “036”.
10.
Press Review to hear and see the notes you sang during the Exercise. During playback of your performance with odd numbered
Warm-ups and Exercises, press Review to turn the guide vocal on and off.
*Pressing the Warm-up or Exercise button twice will switch to User track mode. To return to
Warm-up or Exercise mode, simply press the button again.
Concone Op. 9 Fifty Lessons (for medium voice)
1.
Peel the backing from the static cling solfege sheet and place it on the VT-12 with “Do” on
the “C” pitch indicator light. (See page 9 in the Owner’s Manual for more information.)
2.
Use the up/down arrows to select Exercise Track “087” and press (Play/Stop);
Concone Lesson 1 will play with the guide track.
3.
Use the up arrow to select “088”; Concone Lesson 1 will play without the guide track.
4.
Press Review to hear and see the notes you sang during the Exercise. Your performance will save with the Exercise track until you
record a new performance with that track.
13 Selections from Twenty-Four Italian Songs and Arias (for medium high voice)
1.
Use the up/down arrows to select Exercise Track “187” and press (Play/Stop); the piano accompaniment for “Per la gloria
d’adorarvi” will play. (See Track List for a complete list of selections and their track numbers.)
2.
Press Review to hear and see the notes you sang during the Exercise.
Record Your Own Practice Material and Tracks into the VT-12 (see page 14 in the Owner’s Manual for more information)
1.
Connect your external audio device (MP3/CD player) to the REC IN jack with an 1/8” (mini)
audio cable. The display will flash “rEc” and “U01” indicating that it’s ready to record into User
Track location #1.
2.
Press the up/down arrows if you wish to record into a different User Track location.
3.
Start playback on your external audio device. Set the playback volume level appropriately.
4.
Press (Play/Stop) to begin recording.
5.
Press (Play/Stop) to stop recording.
6.
Press Review to playback the recording and ensure it recorded correctly.
7.
Disconnect your external audio device.
8.
Press either the Warm-up or Exercise button twice to switch between Preset tracks and User
tracks.
9.
Press the up/down arrows to select the User track location into which you recorded new
material and press (Play/Stop).
10.
Sing along with the track and press (Play/Stop).
11.
Press Review to playback the recording of your performance. Your performance will save with
the User track until you record a new performance with that track.
To Previous Page
Loading...
