Panel Descriptions
DC IN jack
Connect the AC adaptor (PSB-6U; sold
separately) here.
* Use only the specied AC adaptor
(PSB-6U), and connect it to an AC outlet
of the correct voltage. Do not use any
other AC adaptor, since this may cause
malfunction.
Place the AC adaptor so the side with
the indicator (see illustration) faces
upwards and the side with textual
information faces downwards.
The indicator will light when you plug
the AC adaptor into an AC outlet.
Caution when making connections
• To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units
before making any connections.
• If you’re using an external speaker, feedback (a whine or howl) can occur depending on the position of the
external speaker relative to the internal microphone. If this occurs, take the following steps.
1. Changing the orientation of the internal microphone.
2. Relocating internal microphone at a greater distance from external speakers.
3. Lowering volume levels.
4. Set the [MIC VOLUME] switch to the “OFF” position.
[POWER] button
Hold down this button to turn the
power on/o.
[VOLUME] dial
This adjusts the volume of the
internal speaker or headphones.
p. 9
7
MetronomePracticingChecking Pitch
ENG
DEU
FRA
ITA
ESL
POR
NLD
To Next Page
Loading...
