197
Chapter 8 Saving Tones and Other Data You’ve Created
Chap.8
If samples not loaded into the SIMM memory are found in
the save destination memory card, those samples will be
deleted from the memory card.
The sample is automatically registered to an empty bank in
CARD A-H.
* To cancel the operation, press [EXIT].
Free Area
SIMM
This displays the amount of free space in the SIMM.
Disk
This displays the free disk space remaining on the connected
SCSI device.
The type of disk is indicated within square brackets ([]).
Furthermore, if there are any Partials, those numbers are
shown as well.
Organizing the Contents of
Memory Cards
<Renaming a File (RENAME)>
1. Press [DISK], lighting the indicator.
2. Press [F5 (Tool)] .
3. Press [F2 (Rename)].
The Card&Disk Rename page appears.
4. Press [F1 (Drive)].
5. Rotate the VALUE dial, or press [ ]/[ ] to select
“CARD.”
6. Press [F6 (OK)].
7. Rotate the VALUE dial to select the file to be changed.
By pressing [F2 (View)], you can specify the category of files
to be displayed.
Turn the VALUE dial or press [ ] or [ ] to select the
category to be loaded, then press [F5 (Mark)]. Press [F4 (Mk
All) if you want to set markers for all files. Press this once
more to remove all markers.
The files can also be sorted. Press [F3 (Sort)] to open the
window for selecting the sorting preferences. Turn the
VALUE dial or press [ ] or [ ] to select the sort type,
then press [F6 (OK)].
Without: Files are displayed in the order in which they have
been saved.
Name: Files are sorted by file name, in ascending order.
Size : Files are sorted in ascending order of file size.
Size : Files are sorted in descending order of file size.
8. Press [F6 (Rename)].
The Rename window will appear.
fig.08-04.e_70
9. Turn the VALUE dial or press [ ], [ ], [ ], or
[ ] to move the cursor and select the characters for
the name, then press [F3 (Next→)].
[F2 (←Prev)]: To move back one character.
[F4 (Insert)]: To insert a “_”.
[F5 (Delete)]: To delete the character at the cursor position.
10.When you are finished naming the song, press [F6 (OK)].
* To cancel the operation, press [EXIT].
Deleting Files (Delete)
1. Press [DISK], lighting the indicator.
2. Press [F5 (Tool)].
3. Press [F2 (Delete)].
The Card&Disk Delete page appears.
4. Press [F1 (Drive)].
5. Rotate the VALUE dial, or press [INC]/[DEC] to select
“CARD.”
6. Press [F6 (OK)].
7. Turn the VALUE dial or press [ ] or [ ] to select the
files to be deleted, then press [F5 (Mark)]. Press [F4 (Mk
All) if you want to set markers for all files. Press this once
more to remove all markers.
* After moving the cursor to the folder, you can open the folder
by pressing [ ], and close the folder by pressing [ ].
* Markers on folders are removed when folders are moved.
To Next Page
Loading...
Need help?
General
