21
Operation
5. Mode switch
A. Press the mode key to open the mode. Press the button repeatedly to cycle
through the different modes (video / camera / playback / setup mode).
B. The top left indicates the video mode, indicates the photo mode, the
indicates the playback mode and the indicates the setup mode.
6. Video
A. Insert a memory card and press the “Power button/Mode key” to turn the
camera on.
B. After the camera is started, press the “Enter/OK key” to start video recor-
ding. During recording, the blue light and the yellow circle will flash.
C. To stop the recording press again the “Enter/OK key”
7. Photo
A. Turn the camera on and press the “Power button/Mode key” to change to
photo mode.
B. Press the “Enter/OK key” to take the picture.
8. Playback mode
Press the “Power button/Mode key” to switch to the Playback mode. Use the
up and down keys to select an image and press OK to show the file.