67
Settings
6. Press mode button to exit the menu.
7. The LCD screen will be adjusted as per the white balance option you selected.
ISO
This is a special function that allows you to compensate the light conditions when the light source is not good
and you also specifically do not wish to use a flash or tripod. When using ISO sensitisation, select a low ISO value
to avoid the appearance of noise in your photo.
1. Press menu button twice.
2. Press up / down button to select the ISO option in the menu.
3. Press menu button to enter into next sub-menu.
4. Press up / down button to select an ISO value from the menu that appears:
Auto / 50 / 100 / 200 / 400 / 800 / 1600.
5. Press menu button to confirm, save and return to menu.
6. Press mode button to exit the menu.
To Next Page
Loading...
