66
Settings
Date stamp
This allows you to set the system time which will be displayed on the photos.
1. Press menu button twice.
2. Press up / down button to select the date option in the menu.
3. Press the menu button to confirm and enter the sub-menu.
4. Press up / down button to select a date option from the menu that appears:
– On selecting “Date” the date will appear on the photo once it is taken.
– On selecting “Off” no date will appear on the photo.
– On selecting “Date & time” the date and time will appear on the photo once it is taken.
White balance
This setting allows the camera to adjust the color of your photos according to the color of your light source.
1. Press menu button twice.
2. Press up / down button to select the white balance option in the menu.
3. Press menu button to enter into next sub-menu.
4. Press up / down button to select a white balance option from the menu that appears: auto, daylight, cloudy,
tungsten, fluorescent H, fluorescent L.
5. Press menu button to confirm, save and return to menu.
ENGLISH
To Next Page