71
Settings
1. Press menu button to enter the setup menu in camera mode.
2. Press the right button to select the setup menu, then press the menu button to enter the menu.
3. Press the up / down button to select the frequency option in the setup menu press menu to enter next menu.
4. Press the up / down button to select 50 Hz or 60 Hz.
5. Press the menu button to confirm, save and return to menu.
6. Press the mode button to exit the setup menu.
Auto power off
By default, your camera switches off automatically if it is not used for 3 minutes. Use the auto off option to
change this setting:
– Option are: off, 1 minute, 3 minutes and 5 minutes.
To set the date
You can set the date and time which is printed on the photos.
1. Press menu button to enter the setup menu in camera mode.
2. Press right button to select the setup menu, then press menu to enter the menu.
3. Press menu button to enter the setup menu.