3）Press
to adjust the level.
1）Press
to select [Clock adjustment].
2） Press the <OK> button.
The adjustment range is 0 - 255. Adjust to the status of minimum interference.
3）Press to adjust the level.
1）Press to select [Phase].
2）Press the <OK> button。
The adjustment range is 0 - +31. Adjust to the status of minimum interference.
38
Caution:
•
The horizontal and vertical position of some computers can be adjusted
entirely by the auto computer adjustment function. If the image is not
correct after this function adjustment, adjust manually.
Phase adjustment
Clock adjustment
When picture jitter or picture contour blurring occurs, adjustments can be made to get
the quality picture.
1） Press the aspect ratio button on the remote control to display the image display
mode menu.
2） Press button again to select the image display mode. ►
The adjustment range is 4:3, 16:9, Original, Panoramic, Automatic, Normal, Full Screen,
Widescreen I, Widescreen II.
picture size
H Position 127
V Position 33
Phase 19
Manual clock 28
Auto setting
picture size normal
To Next Page
Loading...
