EasyManua.ls Logo

Rommelsbacher MX 1250 - Refilling Ingredients; Cleaning and Maintenance; Cleaning and Maintenance Guidelines; Quick Cleaning Process

Rommelsbacher MX 1250
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
Always unplug the appliance before cleaning!
Never immerse base unit, power cord and plug into water or clean
them under running water!
Attention: Hazard of injury! Do not touch the sharp-edged
blade! Handle cutting tools with care to avoid injuries!
Quick cleaning between work processes
For a quick cleaning of the glass jar and the sharp-edged blade between several mixing processes, the
function “CLEAN/PULSE” can be used.
To make use of this function, ll the empty glass jar with some water and a drop of dishwashing
detergent in the empty glass jar and close the top cover fi rmly.
In order to start this function, press and hold the left button. In order to stop this function, release the
button. Also refer to the instructions under point “Operating the appliance".
Then pour out the soap water and rinse with clear water.
Intensive cleaning after fi nishing work
Clean the appliance immediately after use so that residues will not dry up.
Highly pigmented food (e.g. carrots) may stain the appliance’s plastic parts or accessories. Wipe those
parts with some cooking oil before cleaning them.
The following removable parts are suitable for cleaning in the dishwasher:
o Glass jar, top cover (without seal ring), closing cap.
The following removable parts are not suitable for cleaning in the dishwasher:
o Blade unit with 6-winged special blade, seal rings.
Remove all detachable parts from the base unit.
Clean the base unit with a moist cloth and wipe it dry.
Clean all other parts in hot water with some dishwashing detergent or if suitable in the dishwasher.
Clean the blade unit with the 6-winged special blade as well as the seal ring of the blade unit in hot
water with some detergent and a cleaning brush.
Remove the seal ring from the top cover and clean it in hot water with some dishwashing detergent.
After all removable parts are dry again, reassemble them according to the instructions in this manual.
Do not use any abrasives and solvents or sharp objects!
Never use a steam jet appliance for cleaning the appliance or the accessories!
Cleaning and maintenance

Table of Contents

Related product manuals