AIR COMPRESSOR
18
WARNING!
Always wear eye protection with side shields. Failure to do so
could result in objects being thrown into your eyes resulting in
possible serious injury.
WARNING!
Always release all pressure, all pressure, disconnect from power
supply, and allow unit to cool to the touch before cleaning or
making repairs on the air compressor.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics
are susceptible to damage from various types of commercial
solvents and be damaged by their use.
Use clean cloths to remove sort, dust, oil, grease, etc.
AS a routine part of air compressor maintenance, it is also advised
that the oil is routinely checked for proper levels.
WARNING!
Do not at any time let brake uids, gasoline, petroleum- based
products, penetrating oils, etc., come in contact with plastic parts,
Chemicals can damage, weaken or destroy plastic which may
result in serious personal injury.
Electric tools used on berglass material, wallboard, speckling
compounds, or plaster are subject to accelerated wear and pos-
sible premature failure because the berglass chips and grindings
are highly abrasive to bearings, brushes, commutators, etc. Con-
sequently, we do not recommend using this product for extended
work on these types of materials.
However, if you do work with any of these materials, it is extremely
important to clean the product using compressed air.
16
To Next Page
Loading...