Room essentials 430238 - Step 9: Attach Upper Back Panel

14
Carefully turn your unit over onto its front edges. Lay the UPPER BACK (L) over your unit.
Push the SAFETY STRAP through the large hole in the UPPER BACK (L).
Fasten the bottom edge of the UPPER BACK (L) to the LOWER BACK (K). Use eight BLACK 9/16" LARGE HEAD SCREWS (1S).
Fasten the UPPER BACK (L) to the ENDS (A and B) and TOP (C) using the NAILS (1N).
430238
step 9.
(1S) x 8
black 9/16" large head screw
(1N) x 21
nail
A
C
B
L
K
Push the
SAFETY STRAP
through the hole.
1N
1S
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution