20
how to adjust the drawer
Loosen the SCREW in
the slotted hole. Adjust
the drawer up or down as
needed. Tighten the SCREW.
If yes, follow diagrams 1 and 2 below.
diagram 2
Adjust the drawer
up or down.
diagram 1
Open the drawer. Loosen these
SCREWS. Adjust the DRAWER
FRONT up or down as needed. Tighten
the SCREWS. If further adjustments
are needed, go to diagram 2.
Drawer Side
Drawer Front
Drawer Slide
Does your drawer
rub at the top?
incorrect
Does your drawer
rub another drawer?
Does your drawer
rub at the bottom?
The gap should be
constant across the
top with no rubbing.
The gap should be
constant across the
center with no rubbing.
correct
The gap should be
constant across the
bottom with no rubbing.
Drawer front bracket
430238
To Next Page
