Room essentials 430238 - Step 3: Connect Ends to Lower Back

8
Fasten the ENDS (A and B) to the LOWER BACK (K). Tighten four HIDDEN CAMS.
Caution
Risk of damage or injury. Hidden Cams must
be completely tightened. Hidden Cams that
are not completely tightened may loosen, and
parts may separate. To completely tighten:
Tighten
Maximum
210 degrees
Minimum
190 degrees
Start
Arrow
Arrow
430238
step 3.
B
K
These holes
must be here.
Surface
with
HIDDEN
CAMS
A
Surface
without
HIDDEN
CAMS
Surface
with
HIDDEN
CAMS
The holes on the
other surface must be
closer to this edge.
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution