Rope M508G - Page 10

ROPE INNOVATION CO., LTD. CONFIDENTIAL NO.
：
ROPE-15121802
Copyright © 2016 ROPE INNOVATION CO., LTD. All rights reserved. Website: www.ropetrack.com
10
Config failed=fail to set
Set SOS Alert
Numbers
service,phone1,phone2,phone3,password
Eg:
service ,13512345001,13512345002,13512345
003,123456,
If configured OK, when press SOS button, the
device will sent notification SMS to the preset
3 numbers.
SOS alert content: Your vehicle triggered
emergency alarm, now the location of the car
is http://maps.google.com/maps?q= Latitude,
longitude
Delete SOS Alert
Numbers
service, , , ,password
If you want to delete any one of the three
numbers, please leave it in command blank
without space.
Eg: (Delete All)
service, , , ,123456
You can choose to delete some or all the SOS
alert numbers.
Checking
Parameters
param,password
Eg: param,123456
Replied SMS: TCP, APN, APN user name,
APN password, port, system number
if the password is worng, it will reply: Get
status failed.
Remotely Restart
Restart,password
Eg: restart,123456
The device will restart after 1min after
receiving this command,
Recover Default
Password
ResetPwd
Eg: resetpwd
Password will be recovered to default
password if set successfully.
Check GPS
Location
tgoogle,password
Eg: tgoogle,123456
The device will reply with Google link after
receiving the command
Disable Engine
disable eng, password
Eg: disable eng,123456
The device will disable the engine of the car
after receiving the command in the condition
that the speed of car is under 15km/h
Enable Engine
enable eng,password
Eg: enable eng,123456
The device will enable the engine after
receiving the command