Wireless N Adapter RNX-N250PCe User Manual
After click “Add to Profile”, you will see the next window “Wireless Network Properties”
popup with your current wireless signal’s setting. (RNX-N180PCe will detect the
current setting of your SSID). So after the “Wireless Network Properties” popup, all
you need to do is to enter the password of your SSID and click OK to continute.
When done, your wireless adapter will automatically connect to this SSID. However,
Please do make sure returning to “Profile” and set your SSID Profile as your default.
So your utility will remember for the future to link to this SSID when computer is
Power-On.
Now you have complete the setup of the your wireless network. You should be ready
to surf!
17
To Next Page
Loading...
Need help?
General
