Wireless LAN PCI Card RNX-N300X User Manual
15
Adding a new profile
1. Click the “Add” button. The add profile window pops up.
Note: you could also add a new profile quickly by selecting an available network in the
“Network” function then press the “Add to Profile” button.
2. Fill in information for this profile in the system config section:
Profile Name Choose a name for this profile, or use default name defined by
system.
SSID Fill in the intended SSID name or use the drop list to select from
available Aps.
Power Save Mode Choose from CAM (Constantly Awake Mode) or PSM (Power
Saving Mode).
Network Type There are two types, infrastructure and 802.11 Ad-hoc mode.
Under Ad-hoc mode, you could also choose the preamble type;
the available preamble type includes auto and long. In addition to
that, the channel field will be available for setup in Ad-hoc mode.
RTS Threshold For adjusting the RTS threshold number by sliding the bar or key in
the value directly. The default value is 2347.
Fragment Threshold Adjust the Fragment threshold number by sliding the bar or key in
the value directly. The default value is 2346.
3. Select an encryption type and fill in the corresponding wireless network information:
To Next Page
Loading...
Need help?
General
