Ross H Series - Page 10

www.rosseuropa.com
Operating Instructions | Air Preparation Products
10
Manual lling during operation
• Loosen lling screw.
• Fill the reservoir until the oil reaches the maximum level.
• Tighten lling screw again .
Setting the oil amount
The amount of oil can be adjusted during operation.
• Set the oil amount using the metering screw on the
lubricator‘s drop attachment.
• Determine the amount of oil discharged by observing the
number of drops in the drop attachment.
Standardvalue(qv=1000Nl/min):1–2drops/min
+
-