Ross H Series - Lubricator Fill and Adjustment

www.rosseuropa.com
Operating Instructions | Air Preparation Products
9
LUBRICATOR
WARNING
System under pressure during operation!
 Opening the system while it is under pressure may cause
damage to the devices (lubricator) and serious unjuries.
CAUTION
Harmful oil mists!
 Using oil produces harmful oil mists in the compressed
air systems. Thus, lubricators may only be operated in
closed pneumatic systems.
FILL
Regularlychecktheoillevelandrelliftheoilhasreached
theminimumlevel.
Fillthereservoirwiththespeciedoil(see„TechnicalData“)
untiltheoilreachesthemaximumllheight.
NOTE:Ifllinglevelistoohigh,oilcanreachthesystemand
damageit.
Manual lling before commissioning
• Remove the reservoir.
• Fill the reservoir to the maximum level.
• Assemble the reservoir as described in „Assembling the
reservoir and protective guard“.
Manual lling of the assembled oil reservoir
• Make sure the relevant system part is not under pressure.
• Remove the reservoir.
• Fill the reservoir to the maximum level.
• Assemble the reservoir as described in „Assembling the
reservoir and protective guard“.
• Switch the relevant system part back on.