Rosslare AC-C31 - 4 Changing the Normal Secure Code; 5 Changing the Normal Bypass Code; Door Chime Settings

Changing the Normal / Secure Code
Changing the Normal / Bypass Code
and Door Chime Settings
1)
2) "4" Menu 4
3)
4)
Note:
1)
2) "5" Menu 5
3)
a)
b)
c)
d)
Enter Programming Mode
Press to enter
The Mode LED will flash red
Enter the new 4-digit code you
wish to set as Normal / Secure Code
System returns to Normal Mode
You will hear three beeps
The Door LED will turn off
The Mode LED will turn green
- When the Auxiliary Mode is 1, 2, 3, or 4 the Auxiliary
Input takes priority over the Normal / Secure Code.
The Normal / Bypass Code is also used to turn the Door Chime off
and on.
Enter Programming Mode
Press to enter
The Mode LED will flash orange.
Below is a list of the four different ways that the Normal / Bypass
Code and Door Chime can be programmed.
Disable Bypass Mode - Disable Door Chime
Disable Bypass Mode - Enable Door Chime
Enable Bypass Mode - Disable Door Chime
Enable Bypass Mode - Enable Door Chime
!
!
!
!
!
Page 20
06/01
AC-C31
Page 21
06/01
a)
b)
c)
d)
4)
Note:
Disable Bypass Code - Disable Door Chime
Disable Bypass Code - Enable Door Chime
Enable Bypass Code - Disable Door Chime
Enable Bypass Code - Enable Door Chime
Enter the 4-digit code 0000
Enter the 4-digit code 0001
Enter any 4-digit code ending with 0
Enter any 4-digit code not ending with 0
System returns to Normal Mode
You will hear three beeps
The Door LED will turn off
The Mode LED will turn green
- The Door is only generated when the Lock
Strike Relay is activated due to a valid code entry.
!
!
!
AC-C31
Mode Door
GREEN
Mode Door
GREEN
Mode Door
GREEN
RED
?
?
?
?
Mode Door
GREEN
Mode Door
GREEN
Mode Door
GREEN
ORANGE
0
0
0
1
0
0
0
0
?
?
?
0
?
?
?
0