Rosslare AC Series User Manual

AC-x32 Series
Standalone Access Control Units
Installation and Programming Manual
AC-B32 AC-C32 AC-D32

Rosslare AC Series Specifications

General

Operating Voltage	12VDC
Input Voltage	12VDC
Communication	RS-485, TCP/IP
Output Voltage	12V DC
Enclosure Rating	IP65
Type	Access Control Unit

Summary

Technical Specifications

Installation Guide

Wiring Diagrams for AC-x32 Models

Operation Overview

Programming the AC-x32 Units

Introduction to the Programming Menu

Overview of the keypad-driven system for configuring the controller's settings and functions.

Programming Mode: Entering and Exiting

Step-by-step procedures for accessing and safely leaving the programming mode.

Managing Open Codes (1 and 2)

Changing the System Programming Code

Procedure to modify the primary code used to access the unit's programming functions.

Configuring Security and Chime Settings

Guide to changing the Normal/Secure code and Door Chime settings.

Setting Fail-Safe/Secure and Timing Parameters

Configuration of lock operation modes, tamper siren time, and strike release duration.

Primary Code Enrollment Rules

Secondary Code Enrollment and Methods

Enrolling Codes Using the Standard Method

Step-by-step instructions for enrolling user codes when the slot number is known.

Enrolling Secondary Codes via Code Search

Procedure for enrolling secondary codes when only the primary code is known.

Deleting Codes: Standard Method

Deleting Codes: Code Search Method

Restoring Factory Default Settings

Procedure to reset the controller to its original factory configuration, erasing all custom settings.

Lost Code Recovery Procedures

Guides on how to replace lost programming or Normal/Secure codes.