Rosslare AC Series User Manual

Programming
28 AC-x32 Series Installation and Programming Manual
3.
There are four different ways to program the Normal/Bypass code
and door chime:
 Disable both Bypass Code and the
door chime. Enter the code 0000.
 Disable Bypass Code and enable the
door chime. Enter the code 0001.
 Enable Bypass Code and disable the
door chime. Enter any code ending
with 0.
 Enable Bypass Code and enable the
door chime. Enter a code not ending
with 0.
Three beeps are emitted.
The system returns to Normal mode.
5.8 Setting Fail Safe/Secure Operation, Tamper
Siren Time, and Lock Strike Release Time
1. Enter Programming mode.
Press 6 to enter Menu 6.
The Mode LED flashes green.
Mode
Door
Green
Mode
Door
Green
Mode
Door
Green
Green

Rosslare AC Series Specifications

General

Operating Voltage	12VDC
Input Voltage	12VDC
Communication	RS-485, TCP/IP
Output Voltage	12V DC
Enclosure Rating	IP65
Type	Access Control Unit