Rosslare AC Series User Manual

Operation
AC-x32 Series Installation and Programming Manual 19
4.3 Changing the Modes of Operation
4.3.1 Changing from Normal to Secure Mode
The default factory setting for the Normal/Secure Code is 3838.
To change from Normal to Secure mode:
1. Enter the 4-digit Normal/Secure code.
The Mode LED flashes red.
2. Press # to confirm the mode change.
The Mode LED turns red.
4.3.2 Changing from Secure to Normal Mode
The default factory setting for the Normal/Secure Code is 3838.
To change from Secure to Normal mode:
1. Enter the 4-digit Normal/Secure code.
The Mode LED flashes green.
2. Press # to confirm the mode change.
The Mode LED turns green.
Mode
Door
Red
Mode
Door
Red
Mode
Door
Green
Mode
Door
Green

Rosslare AC Series Specifications

General

Operating Voltage	12VDC
Input Voltage	12VDC
Communication	RS-485, TCP/IP
Output Voltage	12V DC
Enclosure Rating	IP65
Type	Access Control Unit