Rosslare AC Series User Manual

Programming
26 AC-x32 Series Installation and Programming Manual
To change the Open Code 2:
1. Enter Programming mode.
2. Press 2 to enter Menu 2.
The Mode LED turns orange.
3. Enter the new 4-digit Open Code 2 code.
Three beeps are emitted.
The system returns to Normal mode.
5.5 Changing the Programming Code
The Programming code cannot be erased; code 0000 is invalid
and does not erase the Programming code.
To change the Programming code:
1. Enter Programming mode.
2. Press 3 to enter Menu 3.
The Mode LED turns green.
3. Enter the new 4-digit Programming
code.
Three beeps are emitted.
The system returns to Normal mode.
Mode
Door
Green
Mode
Door
Orange
Green
Mode
Door
Green
Mode
Door
Green
Mode
Door
Green
Green
Mode
Door
Green

Rosslare AC Series Specifications

General

Operating Voltage	12VDC
Input Voltage	12VDC
Communication	RS-485, TCP/IP
Output Voltage	12V DC
Enclosure Rating	IP65
Type	Access Control Unit